Furniture Restoration • Heirlooms • Architectural Woodwork
Olek Inc. restores antique, vintage and contemporary furniture, family heirlooms, built-ins and architectural woodwork with an emphasis on sound structure, material integrity and finish continuity. From failed joinery and missing veneer to worn finishes and damaged millwork, each treatment is developed around the original piece rather than a one-size-fits-all refinishing formula.
Furniture Worth Saving
Family heirlooms, fine antiques, vintage and designer furniture, and high-quality architectural woodwork often deserve more than a cosmetic touch-up. Olek evaluates structure, materials, finish, prior repairs, history and intended use so sound original fabric can be retained while damaged or missing areas are carefully restored.
Use a verified Olek project here to show the condition, treatment and what original material was retained. The strongest proof is a repair that demonstrates why proper joinery restoration is different from simply adding adhesive to a loose joint.
Learn More →
A real before-and-after should demonstrate species, grain, figure, pattern and color integration rather than merely showing a newly refinished surface. Replacement material should visually belong to the surrounding original work.
Learn More →
The most convincing finish restoration preserves the character that should remain while correcting damage that distracts from the piece. Verified project photography should show color, sheen and surface continuity at close range.
Learn More →
Built-ins, mantels, paneling, moldings and stair-related woodwork often require a combination of site judgment and shop craft. The case-study slot should show how the repair integrates with the surrounding room rather than appearing newly inserted.
Learn More →Preserve. Repair. Integrate.
A beautiful finish cannot compensate for weak joinery. Structural issues are identified first so the finished piece is stable, usable and appropriately repaired.
Where preservation matters, serviceable original wood, veneer, carving, hardware and finish are retained whenever the approved treatment allows.
Species, grain, profile, surface texture, color and sheen are considered so repaired areas integrate with the existing piece instead of reading as obvious patches.
01
Tables, chairs, desks, cabinets, case pieces and mixed-material furniture can be stabilized, repaired and visually restored according to the piece’s construction, age and design intent. Collectible or designer-specific objects that need deeper conservation treatment can connect with Olek’s specialty furniture restoration and conservation expertise . If the primary scope is fabric, leather or cushioning, see residential reupholstery .
02
Loose mortise-and-tenon joints, failed dowels, broken members, split wood and other structural failures are repaired with methods appropriate to the original construction. When a prior repair has compromised the piece, the assembly can be evaluated for a more durable corrective approach rather than simply immobilized with more adhesive.
03
Lifted, missing or damaged veneer, decorative inlays and marquetry can be repaired or recreated with attention to species, cut, figure, pattern and surrounding color. The objective is visual continuity while retaining sound original material wherever the treatment allows.
04
Scratches, chips, discoloration, worn surfaces and finish failure can be addressed through localized treatment, finish matching or full refinishing when appropriate. Color, sheen, texture, transparency and patina are evaluated against the original surface and the owner’s desired outcome.
05
Built-in bookcases, wall paneling, wainscot, mantels, moldings, doors and stair-related woodwork can be repaired, matched and refinished as part of a residential interior. Work may combine site assessment, selective removal, shop restoration and reinstallation. New replacement components, when required, can be coordinated through Olek’s residential fabrication capabilities .
06
Missing carved elements, turned components, decorative moldings, furniture parts and ornamental wood details can be repaired, recreated or matched when the surrounding design provides a reliable reference. Hand carving, profile replication and material/finish matching allow replacement work to integrate with the original piece.
Why Olek
Olek’s roots are in furniture conservation, restoration and reupholstery. Today cabinetmakers, finishers, carvers, upholsterers, metalworkers and other specialists work within one shop so complex residential pieces can be evaluated as complete objects rather than passed between unrelated vendors.
Craftsmanship since 1950
20,000 sq. ft. New Jersey facility
25+ full-time craftsmen across disciplines
Furniture, woodwork, carving & finishing capabilities
Repair With Integrity
Many failed furniture repairs come from treating the symptom instead of the joint or material that failed. Olek’s approach starts by understanding original construction and the cause of failure , then defining a corrective treatment that respects the piece. Improvements to a recurring weakness or prior repair are discussed with the owner before intervention.
Material, Detail & Finish Judgment
Mortise-and-tenon, doweled and other furniture joints are evaluated according to how they were designed to carry load. Wood-to-wood repairs, fitted components and Dutchman inlays can be used where appropriate rather than relying on cosmetic filler.
Decorative surfaces require both material knowledge and visual judgment. Species, cut, figure, grain direction, pattern, carving character and surrounding color all influence whether a repair belongs.
Not every old surface should be stripped. Depending on significance and condition, treatment may involve localized touch-up, finish recovery, color and sheen matching, or deliberate full refinishing.
1950
Established
20,000
Sq. Ft. Facility
25+
Full-Time Craftsmen
Multi-Trade
Restoration Shop
Residential Pieces & Woodwork We Restore
Tables, Chairs & Desks
Joinery, surfaces, finishes, veneers & missing components
Cabinets & Case Furniture
Doors, drawers, hardware, veneer, marquetry & structure
Built-Ins & Libraries
Shelving, cabinetry, millwork, paneling & finish integration
Mantels & Architectural Woodwork
Moldings, trim, carving, stairs & fixed interior elements
From Condition Assessment To Return
01
Olek reviews photographs, construction, damage, prior repairs, dimensions, known history and the owner’s goals before defining treatment.
02
Recommended work, treatment choices, pricing and a project-specific schedule are established before restoration begins.
03
Structural repair, veneer work, carving, surface treatment and finishing are coordinated according to the approved scope.
04
Completed work is reviewed before return. Pickup, specialty shipping, delivery or installation are coordinated according to the piece and location.
Shop Restoration • Site Work • Logistics
Removable furniture is typically best treated in Olek’s equipped Orange, New Jersey shop, where craftsmen and finishing resources are available under controlled conditions. Built-in woodwork and architectural elements may require site assessment, selective removal, on-site work or reinstallation. Local pickup can be coordinated in the NYC/NJ region, with specialty carrier coordination available for furniture traveling farther.
Olek restores antique, vintage, modern and contemporary furniture including tables, chairs, desks, cabinets, case pieces and mixed-material furniture. The appropriate treatment depends on construction, condition, materials, prior repairs and the owner’s goals.
Yes, when the existing surface and materials allow it. Finish matching considers color, sheen, transparency, texture, age and surrounding surfaces. Depending on condition, the best treatment may be localized touch-up, finish restoration or full refinishing.
Yes. Olek can repair lifted or damaged veneer and recreate missing inlay or marquetry where suitable materials and references are available. Matching grain, species, figure, pattern and color is part of the treatment.
Yes. Residential restoration can include built-in cabinetry, paneling, wainscot, mantels, moldings, doors and stair-related woodwork. Depending on the element, work may be performed on site, in the shop, or through a combination of removal, shop restoration and reinstallation.
No. Full refinishing is only one possible treatment. Where original surface, patina, age or authorship matters, a more conservative approach may better preserve the character and material that give the piece significance. Olek discusses the desired outcome before treatment.
There is no useful one-size-fits-all timeline. A localized repair and a complex marquetry, structural or architectural restoration require very different work. Olek establishes a project-specific schedule after reviewing condition, scope, material needs, approvals and logistics.
Both are possible. Removable furniture is generally handled in Olek’s New Jersey facility, while built-ins and architectural woodwork may require site assessment, removal, installation or selected on-site restoration. The treatment location is determined by the object and scope.
Send overall and close-up photos, approximate dimensions, project location, a description of the damage, any known maker or history, any known previous repairs or refinishing, and what you hope to preserve or change. Photos of loose joints, missing veneer, finish damage, labels or signatures are especially useful.
Start With Photos & Condition
Show us the piece, the damage and what matters most to you. Overall and close-up photos plus a few details about size, age, prior repairs, location and desired outcome are usually enough to begin a useful first review.